Konica Minolta magicolor 5570 - Manual (Page 225)

Solving Problems with Printing Quality 211
Image is too
light; there is
low image
density. Laser lens is dirty. Clean the laser lens.
The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
There is not much
toner left in the car-
tridge. Replace the toner cartridge.
One or more of the
print units may be
defective. Remove the print units and check them
for damage. If one is damaged,
replace it.
The media type is set
incorrectly. When printing envelopes, labels, post-
cards, thick stock, glossy, or transpar-
encies, specify the appropriate media
type in the printer driver.
Image is too
dark. One or more of the
print units may be
defective. Remove the print units and check them
for damage. If one is damaged,
replace it.
Image is
blurred;
background
is lightly
stained;
there is
insufficient
gloss of the
printed
image. One or more of the
print units may be
defective. Remove the print units and check them
for damage. If one is damaged,
replace it.
Symptom Cause Solution