Konica Minolta magicolor 5570 - Manual (Page 231)

Status, Error, and Service Messages 217
Error Messages (Warning: )
"
“I-UNIT” in a message refers to the print unit.
REBOOTING
The printer is being
restarted. No action needed.
WARMING UP
The printer is warming up.
This message... means... do this...
FUSER UNIT
END OF LIFE
The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
HDD
NEAR FULL
The hard disk is full. Delete print jobs saved
on the hard disk.
INCORRECT
HDD
Since the hard disk
drive was formatted
with a different
machine, the hard
disk drive could not
be used. Replace the hard disk
drive with one
compatible with this
machine, or select
HDD
FORMAT from SYS
DEFAULT MENU and
format the hard disk.
INCORRECT
MEMORY CARD
Since the
CompactFlash was
formatted with a
different machine, the
CompactFlash could
not be used. Replace the
CompactFlash with one
compatible with this
machine, or select
CARD FORMAT from
SYS DEFAULT MENU
and format the
CompactFlash.
INCORRECT
I-UNIT X
The X print unit is an
unapproved type. Install a KONICA
MINOLTA print unit of
the appropriate type
(AM, EU, AP or GC).
See page 141.
INCORRECT
TONER X
The X toner cartridge
is an unapproved
type. Install a
KONICA MINOLTA toner
cartridge of the appropri-
ate type (AM, EU, AP or
GC). See page 135.
This message... means... do this...