Graphics tab, Font tab, Device options tab – Konica Minolta magicolor 5570 User Manual
Page 38: Postscript tab, Using the windows me/98se ppd file 24 graphics tab
Using the Windows Me/98SE PPD File
24
Graphics Tab
The Graphics Tab allows you to
Specify the resolution for the printout
Specify the printer color settings
Select the halftone setting
Switch between color and monochrome printing
Print a mirror image
Scale (expand/reduce) documents
Font Tab
The Font Tab allows you to
Select the method for using fonts
Select the transmission method for fonts
Device Options Tab
The Device Options Tab allows you to
Print on the back side of paper that has already been printed on
Select the output tray for the staple finisher
turn on/off job collation
turn on/off offset
Switch between color and grayscale printing
Perform color separation
Control the darkness of an image (Brightness)
Specify printer color setting
Set the edge strength to Low, Middle or High
Turn on/off glossy mode
Select whether or not economy printing is used
Postscript Tab
The Postscript Tab allows you to
Specify the Postscript output method
Select whether or not the error messages of a print job are printed
Select whether or not header information is sent with each print job
Specify the Postscript timeout values