Konica Minolta bizhub C654 - Manual (Page 95)

bizhub C754/C654 3-39
3.3 Fax Function 3
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-41.
1
Creating data
% Create data to be sent using application software.
2
Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3
Entering a destination to send data
% Enter a destination to send data.
Checking the cable connection
1
Check that a modular cable is connected to the LINE port of
this machine.
2
Check that a LAN cable is connected to the LAN port of this
machine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
• For IPv4 environment • For IPv6 environment