Konica Minolta bizhub C654 - Manual (Page 11)

bizhub C754/C654 1-5
1.2 Safety information 1
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on,
or damage the power cord. Use of a damaged power cord (exposed core
wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your au-
thorized service representative.
Power source
WARNING
• Use only the power source voltage specified on the machine. Failure to do
that could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or ma-
chines.
Use of a power outlet for more than the marked current value could result in
a fire or electrical shock.
• Do not use an extension cord in principle. Use of an extension cord could
cause a fire or electrical shock. Contact your authorized service represent-
ative if an extension cord is required.
CAUTION
• The outlet must be near the equipment and easily accessible. Otherwise you
can not pull out the power plug when an emergency occurs.
Power plug
WARNING
• Do not unplug and plug in the power cord with a wet hand, as an electrical
shock could result.
• Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
CAUTION
• Do not place any objects around the power plug, as the power plug may be
difficult to pull out when an emergency occurs.
• Do not tug the power cord when unplugging. Pulling on the power cord
could damage the cord, resulting in a fire or electrical shock.
• Remove the power plug from the outlet more than one time a year and clean
the area between the plug terminals. Dust that accumulates between the
plug terminals may cause a fire.
Grounding
WARNING
• Connect the power cord to an electrical outlet that is equipped with a
grounding terminal.
Power cord