Checking the cable connection, Checking network settings of this machine – Konica Minolta bizhub C654 User Manual

Page 84

Scan-to-Send function

3-28

bizhub C754/C654

3.2

Checking the cable connection

Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.

Checking network settings of this machine

Tap [Utility], and select [Device Information].

Check that the IP address is displayed.

If no IP address is displayed, you need to configure the network.

Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the User's Guide DVD.

For information on the default administrator password, refer to the [Quick Assist Guide].

Reference

In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the User's Guide DVD.

•

For IPv4 environment

•

For IPv6 environment

This manual is related to the following products:

bizhub C754