Konica Minolta bizhub C654 - Manual (Page 53)

bizhub C754/C654 2-29
2.6 Loading Paper 2
2.6.4 Bypass Tray
Use the Bypass Tray when printing on a paper size other than for paper trays, or printing on envelopes or
transparencies.
To use the Bypass Tray, load paper and specify the paper type.
Applicable paper types
Plain paper, single-side-only paper, thin paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), trans-
parency, letterhead, colored paper, envelope, label sheets, index paper, recycled paper, and banner paper
Applicable paper sizes
How to load paper
NOTICE
Exercise care not to touch the surface of the Paper Feed Roller with your hands.
1
Open the tray.
% To load banner paper, install the Mount Kit MK-715 for
banner paper.
% To load large-sized paper, pull out the Tray Extension.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hands.
2
After loading paper, adjust the Lateral Guide.
% Load paper into the tray with the print side facing down.
Type Size
Standard-size paper 12 e 18 w to 5-1/2 e 8-1/2 w/v, 4 e 6 w, SRA3 w, A3 w to A6 w, B4 w to
B6 w, A6 card w, 8 e 13 w, 16K w/v, 8K w, banner paper
Custom-size paper Paper width: 90 mm to 320 mm
Paper length: 139.7 mm to 1,200 mm