Konica Minolta bizhub C654 - Manual (Page 70)

Scan-to-Send function 3
3-14 bizhub C754/C654
3.2
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
If no IP address is displayed, you need to configure the network.
- Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the User's Guide DVD.
- For information on the default administrator password, refer to the [Quick Assist Guide].
d
Reference
In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the User's Guide DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
• For IPv4 environment • For IPv6 environment
Name Entry column Detail
Host Address Host name or IP address to which the scanned data is sent page 3-15
File Path Name of the dedicated folder to receive the scanned data page 3-15
User ID User name required to log in to the computer page 3-15
Password Password required to log in to the computer
•
You should not enter this column for security reasons.
Contact your sys-
tem administra-
tor.