Lenovo ThinkServer RD530 - Manual (Page 54)

The server is designed so that LEDs remain lit when the server is connected to an ac power source but is not
turned on, if the power supply is operating correctly. This helps you isolate problems when the server is not
turned on. Many errors are first indicated by a lit error LED on the diagnostic panel of the server. If an LED is
lit, one or more LEDs elsewhere in the server might also be lit to direct you to the source of the error.
The following illustration shows the ThinkServer Management Module status LED and system fan error LEDs
on the system board.
Figure 26. System board LEDs
1 ThinkServer Management Module status LED 6 System fan 4 error LED
2 System fan 8 error LED 7 System fan 3 error LED
3 System fan 7 error LED 8 System fan 2 error LED
4 System fan 6 error LED 9 System fan 1 error LED
5 System fan 5 error LED
1 ThinkServer Management Module status LED
This LED indicates the ThinkServer Management Module (TMM) status of your server.
ThinkServer Management Module
status LED
Color Description
On Green The TMM is not ready.
Off None The TMM has no power or has failed.
Blinking Green The TMM is working.
42 ThinkServer RD530 User Guide