Lenovo ThinkServer RD530 - Manual (Page 131)

6. Press the rear of the retaining bracket 1 in the direction as shown and push the optical drive or dummy
optical drive from the rear until it is projected from the front of the chassis. Then, hold the optical drive
or dummy optical drive from the front and completely slide it out of the chassis.
Mem CPU
PSU
Figure 77. Removing the optical drive
7. Touch the static-protective package that contains the new optical drive to any unpainted surface on the
outside of the server. Then, take the new optical drive out of the package.
8. Do one of the following:
• If you are installing the optical drive, remove the retaining bracket from the dummy optical drive and
install it on the side of the new optical drive.
• If you are replacing the optical drive, remove the retaining bracket from the old optical drive and
install it on the side of the new optical drive.
Figure 78. Installing the optical drive retaining bracket
Chapter 6 . Installing, removing, or replacing hardware 119