beautypg.com

Lenovo ThinkServer RD530 User Manual

Page 135

background image

8. Carefully lift up the hot-swap hard disk drive backplane. When the hooks

1

are aligned with the

holes in the backplane, slowly move the backplane a little bit outward. Then, completely remove the
hot-swap hard disk drive backplane.

Figure 82. Removing the hot-swap hard disk drive backplane

9. Touch the static-protective package that contains the new hot-swap hard disk drive backplane to any

unpainted surface on the outside of the server. Then, remove the new backplane from the package.

Note: Carefully handle the backplane by its edges.

Chapter 6

.

Installing, removing, or replacing hardware

123

See also other documents in the category Lenovo Computer hardware: