Lenovo ThinkServer TS440 - Manual (Page 170)

Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
To reinstall the server cover and reconnect cables to your server, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are
left inside your server.
2. Refer to your note to connect internal cables. Ensure that all internal cables are routed correctly and
secured by any cable clips or ties in the server. Keep cables clear of the hinges and sides of the server
chassis to avoid interference with reinstalling the server cover.
Figure 114. Cable routing
3. If you have removed the front bezel, reinstall it. See “Removing and reinstalling the front bezel” on
page 69.
158 ThinkServer TS440 User Guide