Lenovo ThinkServer TS440 - Manual (Page 123)

6. Position the 2.5-inch solid-state drive into the 3.5-inch to 2.5-inch drive adapter as shown in the
following illustration.
Figure 65. Positioning the 2.5-inch solid-state drive into the drive adapter
7. Align the two screw holes in the solid-state drive with the corresponding holes in the drive adapter.
Then, install the two screws to secure the solid-state drive to the drive adapter.
Figure 66. Installing the screws to secure the solid-state drive to the drive adapter
Chapter 6 . Installing, removing, or replacing hardware 111