Lenovo ThinkServer TS440 - Manual (Page 133)

4. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of
the chassis.
1
CPU
MEM
PSU
1
Figure 77. Removing the hot-swap hard disk drive or the dummy tray
5. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted
surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.
Note: Do not touch the circuit board on the hard disk drive.
Chapter 6 . Installing, removing, or replacing hardware 121