Lenovo Secure Managed Client - Manual (Page 42)

11.
Align backplane screw holes with screw holes on boot drive module. Ensure
backplane connectors are aligned with the drive connectors on the boot drives.
Ensure the top of the circuit board is flush with the top of the boot drive
module. Secure backplane to boot drive module with two screws previously
removed.
12.
Connect data cable(s) to the boot drive module backplane. The top boot drive
data cable connects to 1 in the following figure. The bottom boot drive data
cable connects to 2 .
Figure 36. Installing upper boot drive
Figure 37. Attaching backplane to boot drive module
34 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide