Lenovo Secure Managed Client - Manual (Page 32)

9.
Re-install the processor air duct. For instructions, see “Installing the processor
air duct” on page 9.
10.
Re-install the enclosure cover. For instructions, see “Installing the enclosure
cover” on page 7.
11.
Reconnect all peripheral devices and the AC power cord(s). Power up the
storage system.
Installing FBDIMMs
To install FBDIMMs, do the following:
1.
Observe all safety and ESD precautions in the Safety and Warranty Guide.
2.
Turn off all peripheral devices connected to the storage system. Turn off the
storage system.
3.
Disconnect the AC power cord(s).
4.
Remove the enclosure cover. For instructions, see “Removing the enclosure
cover” on page 6.
5.
Remove the processor air duct. For instructions, see “Removing the processor
air duct” on page 8.
6.
Locate the DIMM sockets.
Table 1.
1 DIMM_A1 5 DIMM_C1
2 DIMM_A2 6 DIMM_C2
3 DIMM_B1 7 DIMM_D1
Figure 25. Locating FBDIMM sockets
24 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide