beautypg.com

Locating pictures on an mmc/sd card – Kodak LS420 User Manual

Page 79

background image

69

Chapter 10

m

When disposing of batteries, follow the manufacturer’s instructions and
any local and national regulations. Kodak suggests customers take
advantage of any community battery recycling programs that may exist in
your area. Contact your local waste remover or recycler for details.

m

Read and follow all warnings and instructions supplied by the battery
manufacturer. Keep all batteries out of the reach of children. Do not allow
children to remove the battery from the charger or the digital camera.

m

Discard used battery according to the manufacturer’s instructions and all
applicable local and national regulations. Utilize established community
battery recycling programs where they are available.

m

In the unlikely event that battery fluid leaks onto your skin, contact Kodak
Health, Safety, and Environment Information at 1-716-722-5151 in the U.S.
In the unlikely event that battery fluid leaks inside the camera, U.S.
customers can contact the Kodak Information Center (KIC) at 1-800-242-
2424. Customers outside the U.S. can contact their local Kodak Customer
Service representative.

m

When removing the battery, allow it to cool before touching, since the
battery may be hot.

Locating Pictures on an MMC/SD Card

Pictures and videos stored on a KODAK MMC/SD Card use a standard agreed
upon by many camera manufacturers. This lets you use the card in different
cameras. If you use a card reader to retrieve your files, the following
description of the card file structure may be helpful:
MISC folder—contains the Print Order file created when you use the Print
Order feature.
SYSTEM folder—used for updating camera firmware.
DCIM folder—root level folder, contains the 100LS420 folder. Each time you
turn on the camera or insert a different card, any empty folders within the
DCIM folder are removed.
100LS420 subfolder—contains all the pictures taken when a card is
inserted in the camera and the storage location is set to Auto.