Kodak LS420 - Manual (Page 61)

51
Chapter 8
A picture is too
light. The flash is not needed. Change to Auto Flash
( page 14 ).
The subject was too
close when the flash was
used. Move so there is at least 2.6
feet (0.8 m) between the
camera and the subject.
Stored pictures are
damaged. The card was removed
when the ready light was
blinking. Make sure the ready light is
not blinking before
removing the card.
The Pictures
Remaining number
does not decrease
after taking a
picture. The picture does not
take up sufficient space
to decrease the picture
remaining number. The camera is operating
normally. Continue taking
pictures.
Camera
Problem Cause Solution