Macintosh os x notice, Install the software, Macintosh os x notice install the software – Kodak LS420 User Manual
Page 50
40
Chapter 6
MACINTOSH OS X Notice
OS X ships with an image capture application that provides the functionality of
KODAK Camera Connection Software and KODAK Picture Transfer Software. Do
not install KODAK Camera Connection Software or KODAK Picture
Transfer Software; they are unnecessary and will not function if installed on
OS X.
You may wish to install KODAK Software for picture viewing, editing, and
sharing. Picture Software installs and runs with OS X in Classic mode.
Install the Software
1
Before you begin, close all software applications.
2
Place the KODAK Software CD into the CD-ROM drive.
3
Load the software:
On a WINDOWS-based computer—if the first install window does not
appear, choose Run from the Start menu and type the drive letter that
contains the CD followed by \setup.exe. For example: d:\setup.exe
On a MACINTOSH computer—on the install window, click Continue.
4
Follow the on-screen instructions to install the software. If prompted,
restart the computer when the installation is complete.
m
To install all applications on the CD, select Typical when prompted.
m
To choose the applications you wish to install, select Custom when
prompted. See
for a description of the applications that are
included on the CD.
NOTE: When prompted, take a few minutes to electronically register your
camera and software. This lets you receive information regarding
software updates and registers some of the products included with the
camera. You must be connected to your Internet service provider to
register electronically.