Agilent Technologies 75000 Series C User Manual
Page 79
Table 2-11. Performance Test Record for the Agilent E1445A (Page 3 of 7)
Model _____________________________ Report No. ____________________________ Date _______________
Test
Description*
Minimum
Measured
Reading
Maximum
Meas
Uncert
TAR
Test 2-1. DC Zeros Test (Values in Vdc)
No Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten)
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044
____________
____________
____________
____________
____________
____________
____________
____________
____________
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
250 kHz Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten)
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044
____________
____________
____________
____________
____________
____________
____________
____________
____________
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
10 MHz Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten)
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044
____________
____________
____________
____________
____________
____________
____________
____________
____________
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
* Since the arbitrary waveform consists of zeros, the expected reading is 0 V, regardless of the amplitude
setting. The amplitude is changed in order to turn the various attenuators on and off.
Agilent E1445A Service Manual
Verification Tests 77