MSI ATX Motherboard - Manual (Page 16)

Command Center
10 Command Center
Warning - Warning Control Panel contains fields
of voltage, fan speed and temperature for you to
set the threshold values. When system detects
the status over your settings, a warning message
will pop-up(as shown below).
You can enable/ disable warning items and alert
sound by selecting the check box next to the
items.
Mobile Control - The Mobile Control control panel is only available for the
motherboard with the built-in WiFi module. It allows you to enable/disable the
Command Center Remote Server. Please refer to the instruction on the Mobile
Control control panel.
SoftAP Management
enable button
Command Center Remote
Server ON/OFF
SoftAP Management Setting
To start remote control:
1. Download and install MSI Command Center APP to your mobile device.
2. Enable Command Center Remote Server on the Mobile Control control
panel.
3. Enable SoftAP Management.
4. Enter SSID and Password, and then click the “Apply” button.
5. Activate Wi-Fi on your mobile device and connect to SoftAP with the SSID.
6. Run MSI Command Center APP on your mobile device.
7. Find the IP address on the SoftAP Management Setting area, and enter the
IP address on your MSI Command Center APP to link your system.
8. Press “Refresh” on the MSI Command Center APP to verify that monitoring
and OC functions are working properly.