EasyN H3 Series User manual - Manual (Page 9)

MH3E-E-A2 - 8 -
5. Software operation
5.1 IPcamera tool
In picture 3，camera-1 and computer-1 are in different subnets，run Devfind.exe in CD，click
search，then select searched IP Camera to modify the parameters，refer to picture 4.
Picture 4- LAN configuration interface
Note： the default parameters of camera: IP 192.168.1.126，port 81
Details：
™ Please notice left-up side interface the current parameters of computer, it shows
the basic network parameters of computer-1,if the computer has more than one
network adapters, please select the right adapter the camera-1 working on.
™ IP address: input IP address，the IP must be in the same subnet with computer.
™ Mask: default mask: 255.255.255.0
™ Gateway: confirm the gateway to be the same one for camera and computer
™ DNS: DNS server IP address
™ Port: the HTTP service port of device，default is 81
™ User and password: default account is user: admin no password