EasyN H3 Series User manual - Manual (Page 33)

MH3E-E-A2 - 32 -
【 Camera Name 】 tick to enable adding name on image
【 Time OSD 】 tick to enable adding time on image
【 OSD Name 】 input OSD name then click Apply button, it can support 18 bit
iii. Network
To configure network parameters on current condition, the software only displays
network parameters of current device, despite it is manually configured or DHCP.
iv. Motion Detection
Configure motion detection:
Step 1: tick area, then it display a green dialog on left image
Step 2: drag the green dialog to position wanted, and configure its size
Step 3: configure sensitivity of alarm area detection. Sensitivity range: 0-75,
default is 35, the greater the value, the more sensitive, and vice versa.