EasyN H3 Series User manual - Manual (Page 28)

MH3E-E-A2 - 27 -
【 Alarm Duration Time 】 Alarm duration time, default is 10 seconds, selecting
range is 5-60 seconds.
【 Pre-recorded alarm Length 】 Pre-recording’s length on alarm, default is 5
seconds, selecting range is 1-15 seconds.
Arm and Disarm
【 Arm 】 Press “Preview”, select area or device for arming, after arming it will
display logo in front of device IP or name.
【 Disarm 】 After disarm, logo disappears.
Note: 1. Linkage alarm only is available on arm condition, if device disarms,
linkage alarm is not available.
2. If new alarm happens on alarm, the alarming time should extend.
3. Motion detection and input alarm can linkage popup video window;
electron map alarm, linkage record and sound alarm, others only support
sound alarm.
1. Manually Record
Select monitoring windows, click button or right click on windows to
select to record, for recording time and path, referring to schedule record.
Record priority:
1. If enable schedule record and alarm record at the same time, it triggers alarm
in schedule alarm, system should stop schedule alarm and runs alarm linkage
record.
2. If enable schedule record and alarm record at the same time, then enable
manually recording when alarm linkage record happens, system should stop
schedule record and alarm record, and run manually recording.
6.9 Playback
1. Playback by searching time
Play button; press this button for playing record
Pause button; press this button for pause
Single frame play; press this button for single frame play, one click one
frame picture