EasyN H3 Series User manual - Manual (Page 31)

MH3E-E-A2 - 30 -
6.11 Parameters configuration
To connect device for configuration on parameters configuration page (double
click device channel, the image should display on right side image frame).
1. Color
【 Brightness 】 drag slider to select best brightness
【 Saturation 】 drag slider to select best saturation
【 Contrast 】 drag slider to select best contrast
【 Hue 】 drag slider to select best color
【 Default 】 click to load default value
【 Flip 】 tick for image turnover(need device support)
【 Mirror 】 tick for mirror image(need device support)
【 Scene 】 white balance: support auto, indoor, outdoor. Default is auto(need
device support)
【 Infrared 】 night vision: support auto switch, manually switch. Default is auto
(need device support)
Note: it can not configure if device does not support that function.
2. Video