EasyN H3 Series User manual - Manual (Page 35)

MH3E-E-A2 - 34 -
6.12 User management
Factory set administrator name is admin, no password. Login with administrator
then add, delete and configure user authority. User authority includes three levels:
admin, user and guest.
“admin” authority: administrator, enable to manage device, manage user, view
video, playback video, configure map, inquire log, and exchange user and exit
software
“user” authority: enable to view video, playback video, configure map, inquire
log, exchange user and modify password
“guest” authority: enable to view video, exchange user and modify password
2.10.1 Add User
Step 1: login with admin then click “Config” then “User Management”
Step 2: click “Add” button, input name and password then select permission
Step 3: click “Save” button to finish
2.10.2 Delete User
Step 1: login with admin then click “Config” then “User Management”
Step 2: select user then click “Delete” button
2.10.3 Modify User Authority
Step 1: login with admin then click “Config” then “User Management”
Step 2: select user then click “Modify”
Step 3: select permission then click “Save”
2.10.4 Modify User Password
Step 1: click “Config” then “User Management”
Step 2: select user then click “Modify”
Step 3: input new password then click “Save”
6.13 Log
Log Type: