EasyN H3 Series User manual - Manual (Page 38)

MH3E-E-A2 - 37 -
Please adjust video parameters for camera（mode, brightness, contrast, saturation,
etc）.
If the background light is too strong，please adjust the range to view.
™ The camera finder can not find device.
Please check if the camera and computer are in the same subnet. And if the cable or power adapter
is not good, it will cause the problem too.
【 Normally, the power light （yellow）is always
on，the network light （green） is always flickering】.
If it is the firewall limiting the access of camera finder.
™ The remote access does not work.
1）If device works on LAN？If it can, then confirm the ddns if it is correct；
2）To check port forwarding in router if it is correct；
3) Does the network provided by ISP (network runner) can support to set up virtual server?
8.2 Warranty instruction
a) Warranty for one year dues to this warranty card（not include man-made
damage）. Late for warranty time，need to pay fee for service.
b) If damage is caused by non-correct use or other reason not included in
warranty, it can enjoy free repairing on warranty card except component fee.
c) Send product with warranty card to manufacturer or seller when searching
for repairing.
d) Open shell and tear sealing label is not in warranty.
e) It would not accept damaged device caused by transform or extra-adding.
Below cases are not in warranty
a) The periodic inspection, maintenance, repair or replacement parts caused by
normal wear and tear.
b) Damage caused by fall, extrusion, artificial flooding, moisture and other
man-made caused damage.
c) Damage caused by flood, fire, lighting and other natural disasters or force
majeure factors.
d) Device ever repaired by non-authority.
List above refers to relevant provision if there is some change.