RADWAG Low profiled scales - Manual (Page 58)

• Put a weight of the displayed mass value on the pan and press
.
The calibration process will start which is signalled by the message:
• After completion of the process of calibration the following screen
will appear
• Take off the weight , then the following sequence of screens
will appear
• Calibration process can be terminated anytime by pressing
which is signalled by the following message on the display:
• Return to weighing with saving changes that have been made.
Caution:
If the calibration process (span adjustment) lasts longer than 15 the
message will be displayed and short audible signal will be
emitted. Press to perform calibration again with more stable
ambient conditions!
- 58 -