Selecting quantity of operation modes, Of operation modes, Selecting quantity – RADWAG Low profiled scales User Manual
Page 41
no
– mode is disabled
YES
– mode is enabled
Return to weighing:
See 10.2.2.
15.2. Selecting quantity of operation modes
This function enables user to set if ,after pressing
key, all operating
modes will be accessible (ALL) or only one from the list chosen and
used by operator.
Procedure:
• Enter the submenu
After choosing setting press
key. The program will return
to displaying name of submenu
Return to weighing:
See 10.2.2.
- 41 -
This manual is related to the following products: