RADWAG Low profiled scales - Manual (Page 22)

Notice:
Tarring cannot be performer when a negative or zero value is being
displayed. In such case appears on the display and short
audible signal will be emitted.
11.2. Inscribing tare value
You can also inscribe a tare value. While in weighings mode press:
• Press
simultaneously and ,
• You will see :
• Using
and set the tare value,
• Press ,
• Program returns to weighings mode. The inscribed tare
value can be seen on the display with „–” sign,
• Tare can be inscribed anytime in weighings mode.
Notice:
1. You cannot inscribe a new tare value when the tare value in memory
is greater than zero. In the case of trying this the message
will be displayed and short audible signal will be emitted.
2. Users can also enter up to 9 tare values to the scale memory
(see 15.10 of his manual).
- 22 -