RADWAG Low profiled scales - Manual (Page 17)

9. INSCRIPTIONS ON THE DISPLAY
No Text string Description
1. FIL Filter level
2. bAud Transmission baud rate
3. PCS Piece counting
4. HiLo +/- control according to a standard mass
5. rEPL Automatic printout
6. StAb The condition of printing data
7. Auto Autozero correction
8. t1 Power save – time to switch off while no operation
9. toP Latch of the max measurement
10. Add Totalizing
11. AnLS Weighing animals
12. tArE Memory of 9 tare values
13. Indication in autozero zone (indication = exact zero)
14. Stable result (ready to read)
15. PCS Operation mode – counting pieces
16. kg (g) Operation mode – weighing
17. Rechargeable battery pack or battery discharged (BAT-LO)
18. Net Tare function has been used.
19. Min
+/- control with reference to the standard mass : setting
the lower threshold or mass below the first threshold
20. OK
+/- control with reference to the standard mass:
load mass between the thresholds
21. Max
+/- control with reference to the standard mass: setting
the upper threshold or mass over the second threshold
- 17 -