Temporarily selected unit, Main parameters – RADWAG Low profiled scales User Manual
Page 25
11.6. Temporarily selected unit
This function is used to set weight unit the scale will use temporarily until
the next power off or next selection.
Procedure:
• Press
and then:
• After you select the unit you want come back to weighing procedure.
Options:
A. When [kg] is a basic unit, users can select following units:
[kg, lb, N], [lb] is not accessible for verified scales.
B. When [g] is a basic unit, users can select following units:
[g, ct, lb], [lb] is not accessible for verified scales.
12. MAIN PARAMETERS
Users can adjust the scale to external ambient conditions (filtering level)
or particular needs (autozero operation, tare memory). This parameters
are placed in
- 25 -
This manual is related to the following products: