WIKA DI10 User Manual
Page 30
8 Faults
30
WIKA operating instructions digital indicator DI10
7 Maintenance and cleaning
7.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
7.2 Cleaning
CAUTION!
Before
cleaning,
correctly
disconnect the instrument
from the mains.
Clean the instrument with a moist cloth.
Electrical connections must not come into contact with
moisture.
For information on returning the instrument see chapter "9.2
Return".
8 Faults
Fault
Solution
The display of the device is dark
Check the current loop current of the
device.
Please contact the manufacturer if
errors of this kind occur.
The device shows 4 bars in the upper
part of the display
Displayed overflow at exceedance
of display/measuring range
The device shows 4 bars in the lower
part of the display
Displayed overflow at undershooting
of display/measuring range
The device shows „Err2“ (Error 2)
During parameterization current <
3,5 mA