WIKA DI10 User Manual
Page 13
6 Commissoning, operation
WIKA operating instructions digital indicator model DI10
13
6 Commissoning,
operation
Please read the safety instructions and installation instructions in chapter 2
before installation and keep this user manual for future reference.
6.1 Mounting
Indicator for panel mounting:
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping
screws by hand. Then use a screwdriver to tighten them another half a
turn.
CAUTION! The torque should not exceed 0.1 Nm!
The dimension symbols can be exchanged before
installation via a channel on the side!