WIKA DI10 User Manual
Page 23
6 Commissoning, operation
WIKA operating instructions digital indicator model DI10
23
6.5.1 Limit values, limits, hysteresis
Menu level Parameterization level
LI-1
Limit values / Limits, LI-1:
0
0
0
0
For both limit values, two different values can be
parameterized. With this, the parameters for each limit value
are called up one after the other.
HY-1
Hysteresis for limit values, HY-1:
0
0
0
0
For both limit values, a hysteresis function exists that reacts
according to the functional principle (operating current /
quiescent current).
Fu-1
Function if display falls below / exceeds limit value, Fu-1:
HIgH
Louu
(Low)
To indicate if the value falls below the lower limit value, Louu
can be selected (LOW = lower limit value) and if it goes above
the upper limit value, HIgH can be selected (HIgH = upper
limit value). LOW corresponds to the quiescent current
principle and HIgH to the operating current principle.