WIKA CS4S - Manual (Page 6)

Operating Instructions Temperature Indicating Controller CS4S
V1.1
•
10/2006 - 6 -
1. Model Name and Order Code
CS4S - 3 A / M - B - - -... Series name CS4S
Control
characteristic 3 PID (setable control parameter)
(1)
Alarm 1 (A1) A Process value monitoring, output relay
(2)
R Relay
S Logic level (DC 0/12 V) for solid state relay
Control output
A Analogue current signal (4 ... 20 mA)
Input M Multi-function input (input configuration setable)
(3)
H AC 100 ... 240 V, 50 ... 60 Hz Power supply
L AC/DC 24 V
Case colour B Black
B Factory adjustment Instrument configuration
# (?) To customers specification
2AS
(4)
Alarm output 2: process value monitoring
2AR
(4)
Alarm output 2: control loop monitoring
2AL
(4)
Alarm output 2: process value and control loop
monitoring with common terminals
W10
(4) (5)
Heater burnout alarm for 1 phase (max. 5 A)
W11 (4) (5) Heater burnout alarm for 1 phase (max. 10 A)
W12
(4) (5)
Heater burnout alarm for 1 phase (max. 20 A)
W15
(4) (5)
Heater burnout alarm for 1 phase (max. 50 A)
DT2 (4) 2. control output (three step control) non-contact relay
SV2 Parameter memory for 2 set values, external
selectable by connection terminals
CR5
(6)
Serial communication RS 485
R50
Shunt resistor 50
Ω
for input signals 0/4 ... 20 mA
Options
KAB Terminal cover
(1) PID, PI, PD, P and ON/OFF action are programmable.
(2) 9 types of alarm action, no alarm action and energized/deenergized are selectable by key operation.
(3) The input configuration can be selected from the user by the front keys.
(4) Only 2 options can be added from Alarm output 2, Heater burnout alarm and 2. control output.
(5) For control output analogue current signal heater burnout alarm cannot be added.
(6) When serial communication is added, SV1/SV2 external selection (standard function) does not work.