WIKA CS4S - Manual (Page 2)

Operating Instructions Temperature Indicating Controller CS4S
V1.1
•
10/2006 - 2 -
Preface
Thank you for the purchase of our microcomputer based temperature indicating controllers CS4S.
This manual contains instructions for the mounting, functions, operations and notes when operating the CS4S.
For model confirmation and unit specifications, please read this manual carefully before starting operation.
To prevent accidents arising from the misuse of this controller, please ensure the operator using it receives this
manual.
Caution
• This instrument should be used according to the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause fire.
• Be sure to follow the warnings, cautions and notices. If not, it could cause serious injury or malfunction.
• Specifications of the CS4S and the contents of this instruction manual are subject to change without notice.
• Care has been taken to assure, that the contents of this instruction manual are correct, but if there are any
doubts, mistakes or questions, please inform our sales department.
• This instrument is designed to be installed in a control panel. If not, measures must be taken to ensure that the
operator cannot touch power terminals or other high voltage sections.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• WIKA is not liable for any damages or secondary damages incurred as a result of using this product, including
any indirect damages.
SAFETY PRECAUTIONS
( Be sure to read these precautions before using our products. )
The safety precautions are classified into categories: “Warning” and “Caution”.
Depending on circumstances, procedures indicated by
Caution may be linked to serious
results, so be sure to follow the directions for usage.
Warning
Procedures which may lead to dangerous conditions and cause death or serious
injury, if not carried out properly.
Caution
Procedures which may lead to dangerous conditions and cause superficial to medium
injury or physical damage or may degrade or damage the product, if not carried out
properly.