WIKA CS4S User Manual
Page 14

Operating Instructions Temperature Indicating Controller CS4S
V1.1
•
10/2006
- 14 -
5.2 Main setting mode 
 
Character
Name, Function, Setting range
Default value
SV1 
• Sets set value 1. 
• Setting range: SV low limit to SV high limit 
0 °C
SV2 
• Sets set value 2. 
• Available only when the option [SV2] is applied. 
• Setting range: SV low limit to SV high limit 
0 °C
 
5.3 Sub setting mode 
 
Character
Name, Function, Setting range
Default value
AT setting/Auto-reset setting 
• Designates auto-tuning Performance or auto-reset Performance. 
• If the auto-tuning is cancelled during the process, P, I and D 
values revert to the former value at which AT is performed.
• When auto-tuning has not finished after 4 hours, it is cancelled
automatically.
• Auto-reset is cancelled in approximately 4 minutes.
OUT1 proportional band setting 
• Sets the proportional band for OUT1. 
• OUT1 becomes ON/OFF action when set to 0 … 0.0 
• 0 … 1000 °C (2000 °F), 0.0 … 999.9 °C (°F) or 0.0 … 100.0 % 
10 °C
OUT2 proportional band setting 
• Sets the proportional band for OUT2. 
• OUT2 becomes ON/OFF action when OUT1 proportional band is 
set to 0 or 0.0.
• Not available if option [DT2] is not added or if OUT1 is ON/OFF
action.
• 0.0 … 10.0 times (multiplying factor to OUT1 proportional band)
1.0 times
Integral time setting 
• Sets integral time for OUT1. 
• Setting the value to 0 disables the function. 
• Not available when OUT1 is ON/OFF action. 
• Auto-reset can be performed when PD action (I=0). 
• Setting range: 0 … 1000 seconds 
200 seconds
Derivative time setting 
• Sets derivative time for OUT1. 
• Setting the value to 0 disables the function. 
• Not available when OUT1 is ON/OFF action. 
• Setting range: 0 … 300 seconds 
50 seconds
ARW setting 
• Sets ARW for OUT1. 
• Available only when PID is the control action. 
• Setting range: 0 … 100 % 
50 %
OUT1 proportional cycle setting 
• Sets proportional cycle for OUT1. 
• Not available for control output analogue current signal or when 
OUT1 is ON/OFF action.
• Setting range: 1 … 120 seconds
30 seconds or 
3 seconds 
