WIKA SL-1 User Manual

Page 2

2488791.07 GB/D/F 06/2010

2 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi SL-1

2488791.07 GB/D/F 06/2010

WIKA Operating instructions/Betriebsanleitung/Mode d'emploi SL-1

Contents Page 3-15

1. Important details for your information
2. A quick overview for you
3. Signs, symbols and abbreviations
4. Function
5. For your safety
6. Packaging

Starting, operation

8. Adjustment of zero point / span
9. Maintenance, accessories
10. Trouble shooting
11. Storage, disposal

Inhalt Seite 16-28

1. Wichtiges zu Ihrer Information
2. Der schnelle Überblick für Sie
3. Zeichenerklärungen, Abkürzungen
4. Funktion
5. Zu Ihrer Sicherheit
6. Verpackung

Inbetriebnahme, Betrieb

8. Einstellung Nullpunkt / Spanne
9. Wartung,

Zubehör

10. Störbeseitigung
11. Lagerung, Entsorgung

Contenu Page 28-40

1. Informations inportantes
2. Aperçu rapide
3. Explication des symboles, abréviations
4. Fonction
5. Pour votre sécurité
6. Emballage

Mise en service, exploitation

8. Réglage du zéro / gain
9. Entretien, accessoires
10. Elimination de perturbations
11. Stockage, mise au rebut

Contents / Inhalt / Contenu

1. Important details for your information / 2. A quick overview for you

Use of the product in accordance with the intended use SL-1:
Use the pressure transmitter to transform the pressure into an electrical signal.

1. Important details for your information

Read these operating instructions before installing and starting the pressure transmitter. Keep
the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications. If
questions remain regarding a specific application, you can obtain further information:

Via our Internet address www.wika.de / www.wika.com

The product data sheet is designated as PE 81.36

Contact WIKA for additional technical support (+49) 9372 / 132-8976

With special model number, e.g. SL-10000, please note specifications in the delivery note.
If the serial number and/or the 2D code on the hexagon gets illegible (e.g. by mechanical
damage or repainting), the retraceability of the instrument is not possible any more.
WIKA pressure transmitters are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment. Our environmental manage-
ment system is certified to DIN EN ISO 14001.

Knowledge required
Install and start the pressure transmitter only if you are familiar with the relevant regulations
and directives of your country and if you have the qualification required. You have to be
acquainted with the rules and regulations on measurement and control technology and elec-
tric circuits. Depending on the operating conditions of your application you have to have the
corresponding knowledge, e.g. of aggressive media.

2. A quick overview for you

If you want to get a quick overview, read

Chapters 3, 5, 7 and 11. There you will get some

short safety instructions and important information on your product and its starting.

Read

these chapters in any case.

Current terms and conditions apply.
Details are available on ...
Es gelten unsere aktuellen Verkaufs-
und Lieferbedingungen siehe unter ...
Toute commande est assujettie à nos
conditions de ventes et de fournitures
dans leur dernière version en vigueur, voir
sous ...

www.wika.de