DuraVent Type B Gas Vent - Manual (Page 2)

A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE
TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO
COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE
THAT TYPE B GAS VENT BE INSTALLED ONLY IN ACCORDANCE
WITH THESE INSTRUCTIONS.
NOTE:
READ THROUGH ALL OF THESE INSTRUCTIONS BEFORE
BEGINNING YOUR INSTALLATION. FAILURE TO INSTALL
AS DESCRIBED IN THIS INSTRUCTION WILL VOID THE
MANUFACTURER’S WARRANTY, AND MAY HAVE AN EFFECT ON
YOUR HOMEOWNER’S INSURANCE AND UL LISTING STATUS.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
C AME R A-R E ADY L OG OTY P E – UL MAR K F OR C ANADA AND THE U.S .
These Marks are registered by Underwriters L aboratories Inc.
The minimum height of the registered trademark symbol ® shall be 3/64 of an inch. When the overall diameter of the
UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legible to the naked eye.
The font for all letter forms is Helvetica Condensed B lack, except for the trademark symbol ® , which is
Helvetica Condensed Medium. No other fonts are acceptable.
200-195C 20M/11/97
LISTED
MH6357
IMPORTANT:
Read through all of these instructions
before beginning your installation. Failure
to install this product as described in these
instructions will void the manufacturer’s
warranty, may create a fire or other safety
hazard, and may affect your homeowner’s
insurance and safety listing of your
appliance.
Keep these instructions for future
reference.
Dear Customer, Installer, or End User:
We welcome any comments regarding matters
pertaining to our DuraVent products.
We welcome any ideas, input or complaints
and I’ll make sure that someone responds
directly back to you.
Send your emails to:
[email protected]
If you are searching for tech support or product
information, please phone us at 800-835-4429.
Or email us at:
[email protected]