Kramer Electronics TP-125EDID - Manual (Page 7)

4 TP-121/3/5EDID, PT-110EDID - Overview
3 Overview
This user manual describes the following devices:
•
TP-121EDID XGA/Audio Line Transmitter (see Section 4 )
•
TP-123EDID XGA/Audio/Data Line Transmitter (see Section 5 )
•
TP-125EDID XGA/Audio/Data Line Transmitter (see Section 6 )
•
PT-110EDID XGA Line Transmitter (see Section 7 )
This section also describes:
•
Using shielded twisted pair (STP)/unshielded twisted pair (UTP), see
Section 3.1
•
The power connect feature, see Section 3.2
3.1 About Shielded Twisted Pair (STP)/Unshielded Twisted
Pair (UTP)
We recommend that you use Shielded Twisted Pair (STP) cable, and stress that
the compliance to electromagnetic interference was tested using STP cable. There
are different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP
is intended for analog signals where skewing is not an issue.
In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free
cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be
preferable for long-range applications. In any event when using UTP cable, it is
advisable to ensure that the cable is installed far away from electric cables, motors
and so on, which are prone to create electrical interference.