Kramer Electronics TP-125EDID - Manual (Page 24)

TP-121/3/5EDID, PT-110EDID - Your PT-110EDID 21
7 Your PT-110EDID
This section describes the PT-110EDID XGA/Line Transmitter.
7.1 Overview
The PT-110EDID is a high-performance XGA line transmitter that inputs an XGA
(up to WUXGA, 1080p) signal and transmits it over CAT 5 cable to a receiver (for
example, the Kramer TP-122N XGA/Audio Line Receiver).
The PT-110EDID is pre-programmed with default EDID information ready for the
source even before capturing the EDID from the display. When the PT-110EDID is
connected to a display device and the EDID CAPTURE button is pressed, the
PT-110EDID reads and stores the EDID (Extended Display Identification Data)
from the display device. The display can be disconnected and later reconnected
without rebooting the operating system.
The PT-110EDID features:
•
A maximum resolution of WUXGA and 1080p
•
A transmission range of more than 300ft (100m), and a 20kHz audio
bandwidth with an S/N ratio that exceeds 80dB on the same
transmission range
•
EDID Capture that copies and stores the EDID from a display device
•
The Power Connect Feature that transmits power to the receiving
device, or receives power from it, over twisted pair cable
•
H and V Sync polarity switches for improved display compatibility with the
CAT 5 outputs
•
Is 12V DC fed
Figure 9 defines the PT-110EDID: