beautypg.com

3 connecting the rs-232 port, Connecting the rs-232 port, Figure 7 – Kramer Electronics TP-125EDID User Manual

Page 22

background image

TP-121/3/5EDID, PT-110EDID - Your TP-125EDID

19

Figure 7: Connecting the TP-125EDID XGA/Audio/Data Line Transmitter

6.3

Connecting the RS-232 Port

To control an RS-232 controllable remote device from a PC or RS-232 controller,

prepare an RS-232 cable with a 9-pin D-sub connector at one end, and a 3-pin

terminal block connector at the other end, as shown in

Figure 8

:

This manual is related to the following products:
See also other documents in the category Kramer Electronics Accessories for electrical: