4 technical specifications – tp-125edid, Technical specifications – tp-125edid, Figure 8: rs-232 pinout connection – Kramer Electronics TP-125EDID User Manual
Page 23
20
TP-121/3/5EDID, PT-110EDID - Your TP-125EDID
Connect this PIN
on the Terminal
Block Connector:
To this PIN on the
9-pin D-sub
Connector
TxD
PIN 2
RxD
PIN 3
GND
PIN 5
Figure 8: RS-232 PINOUT Connection
6.4
Technical Specifications – TP-125EDID
INPUTS:
Video: 1 UXGA on an 15-pin HD connector
Audio: 1 audio ANALOG 3.5mm mini jack
OUTPUT:
1 RJ-45 OUT connector
RESOLUTION:
Up to WUXGA and 1080p
S/N RATIO:
Video: 58dB unweighted, 68.3dB @5MHz weighted
Audio: <-80dB
CONTROL:
RS-232 3-pin terminal block
RS-232 BAUD RATE:
Up to 19200kbps
RS-232 MODE:
Full-duplex
BANDWIDTH:
Audio: 20Hz to 20kHz @0.5dB
TOTAL GAIN:
Analog/analog: 0dB, analog/SPDIF: -12dBFS
COUPLING:
AC
TND+N:
Audio: <0.01%
POWER CONSUMPTION:
12V DC 140mA
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95")
W, D, H
WEIGHT:
0.3kg. (0.67lbs.) approx.
ACCESSORIES:
Power supply
OPTIONS:
RK-3T 19” rack adapter
All measurements are based on the transmitter/receiver pair, tested with 100m CAT 5 cable.
Specifications are subject to change without notice a
RxD
TxD
GND
PIN 5 Connected to GND
PIN 3 Connected to RxD
PIN 2 Connected to TxD
1
2
3
4
5
6
7
8
9
RS-232 Pinout
To PC (
)
9-pin D-sub