Kramer Electronics RC-3TBU - Manual (Page 10)

SL-14RC/N - Defining the Remote Control Panels 7
5 Defining the Remote Control Panels
The SL-14RC/N supports both the RC-3TB and the RC-3TBU Remote Control
Panels.
The RC-3TB and the RC-3TBU buttons can be programmed to emulate the
buttons on the SL-14RC/N. On the RC-3TB, the assignment of the button
emulation is done using the rotary switch. On the RC-3TBU, the assignment is
done using the RC-3TBU Software Configurator.
5.1 Defining the RC-3TB Remote Control Panel
Figure 3 defines the RC-3TB.
Figure 3: RC-3TB Remote Control Panel Components
# Feature Function
1 Mounting Holes 2 holes for mounting the RC-3TB to the PTBUS-3 or
TBUS-6W
2 Button 1 Function is always assigned to button 12 on SL-14RC/N
3 Buttons 2 and 3 Function is assigned by the rotary switch position
4 K-NET Connector Connects to either SL-14RC/N or additional RC-3TB