Kramer Electronics VP-790 - Manual (Page 4)

VP-790 – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Using the IR Transmitter 6
3.2 Defining the VP-790 Genlock Presentation Switcher/Scaler 6
4 Installing in a Rack 9
5 Connecting the VP-790 10
6 Configuring the VP-790 via the OSD MENU Screens 12
6.1 The Input Screen 13
6.2 The Picture Screen 15
6.3 The Output Screen 16
6.4 The PIP Screen 19
6.5 The Multi-unit Screen 21
6.6 The Geometry Screen 24
6.7 The Setup Screen 25
6.8 The Info Screen 27
7 Controlling the VP-790 28
7.1 Controlling via the Front Panel Buttons 28
7.2 Connecting to the Product via RS-232 28
7.3 Controlling via the Ethernet 28
7.4 Controlling via the Infrared Remote Control Transmitter 32
8 Firmware Upgrade 33
8.1 Installing the VP-790 Updater Tool 33
8.2 Saving User Settings 36
8.3 Updating the Firmware 36
9 Technical Specifications 38
9.1 Input Resolutions 38
9.2 Output Resolutions 39
9.3 RS-232 Communication Protocol 40