Kramer Electronics VP-790 - Manual (Page 11)

6 VP-790 - Overview
The VP-790
is housed in a 19” 1U rack mountable enclosure, with rack “ears”
included and is fed from a 100-240 VAC universal switching power supply.
3.1 Using the IR Transmitter
You can use the IR transmitter to control the machine via the built-in IR receiver on
the front panel or, instead, via an optional external IR receiver (Model: C-A35M/IRR-
50). The external IR receiver can be located up to 15 meters away from the
machine. This distance can be extended to up to 60 meters when used with three
extension cables (Model: C-A35M/A35F-50).
Before using the external IR receiver, be sure to arrange for your Kramer dealer to
insert the internal IR connection cable (P/N: 505-70434010-S) with the 3.5mm
connector that fits into the REMOTE IR opening on the rear panel. Connect the
external IR
receiver to the REMOTE IR 3.5mm connector.
3.2 Defining the VP-790 Genlock Presentation
Switcher/Scaler
This section defines the VP-790.