Kramer Electronics VP-790 - Manual (Page 36)

VP-790 - Controlling the VP-790 31
31
The main menu appears:
Figure 16: Web Browser Address Bar
The main menu lets you access the different menu items. The menu items are
similar to the OSD menu (see Section 6 )
The Menu Description
Input
(see
Section 6.1 )
Select the: Source, DVI Color Format, HDMI Color Format, HDMI Color
Format, Component Setup, Test Pattern, SDI to HDMI Audio Map and
SDI Audio Routing;
Set the: Overscan, H-Position, V-Position, Frequency, Phase and
perform Auto Image
Picture
(see
Section 6.2 )
Set the: Brightness, Contrast, Color, Hue and Sharpness
Select the: Temporal NR, Mosquito NR, Block NR, Detail Enhancement,
Luma Transition Enhance, Chroma Transition Enhance, Cross Color
Suppression
Output
(see
Section 6.3 )
Select the: Resolution, Frame Rate, Allowed Frame Rates, HDMI Type,
Aspect Ratio, Zoom Enable and Flicker Filter Recursion
Set the: Output Gamma, Zoom, Zoom H-Pan, Zoom V-Pan and Flicker
Filter Strength
PIP
(see
Section 6.4 )
Select the: Type, Source, PIP Size and PIP Position
Set the: H-Position and V-Position
Multi-unit
(see
Section 6.5 )
Select the Auto Zoom
Set the unit width, unit height, H-Position and V-Position
Access the Blendwidth, Blend Curve Type and Black-Level Uplift
submenus
Geometry
(see
Section 6.6 )
Select the: Application, Location and Discrete Warp Map
Set the Horizontal Keystone, Vertical Keystone, Pincushion/Barrel
distortion and Rotation
Access the Diagonal Projection submenu
Reset to default values