Kramer Electronics VP-790 - Manual (Page 21)

16 VP-790 - Configuring the VP-790 via the OSD MENU Screens
6.3 The Output Screen
Figure 7: Output Screen
Setting Function
Resolution Set the resolution: 640x480, 800x600, 1024x768, 1280x768, 1280x800,
1280x1024, 1360x768, 1366x768, 1400x1050, 1440x900, 1600x1200,
1680x1050, 1920x1200, 480i, 480p, 576p, 720p, 1080i, 1080p
Note that any change in the resolution must be confirmed via the count-down
message that appears on the screen
The 3G-SDI output supports 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
resolutions only
Frame Rate Select 60Hz, 50Hz or Auto
When Auto is selected, the output frame rate follows the input frame rate as
configured in the Output Config menu
HDMI Type Set the HDMI type: DVI/HDMI, Native, DVI Forced
DVI/HDMI:
the output is set to the capability of the attached monitor and is
determined by the information provided through DDC and EDID by the monitor
Native: the output resolution is automatically set to the native screen
resolution of the connected display
DVI Forced: outputs with 24 bit color depth irrespective of the supported
standard of the display