Kramer Electronics VS-88HD - Manual (Page 37)

Kramer Protocol 3000
33
33
11.3.4 Preset Commands
Command Syntax Response
Store current connections to
preset
PRST-STO PRESET
Short form: PSTO PRESET
PRST-STO PRESET RESULT
Recall saved preset PRST-RCL PRESET
Short form: PRCL PRESET
PRST-RCL PRESET RESULT
Delete saved preset PRST-DEL PRESET
Short form: PDEL PRESET
PRST-DEL PRESET RESULT
Read video connections from
saved preset
PRST-VID? PRESET,OUT
Short form: PVID? PRESET,OUT
PRST-VID? PRESET, *
PRST-VID PRESET, IN>OUT
PRST-VID PRESET, IN>1, IN>2,…
Read saved presets list PRST-LST?
Short form: PLST? PRST-LST PRESET, PRESET, …
Parameter Description:
PRESET = Preset number.
OUT = Output in preset to display, '*' for all.
Examples:
Store current video connections
to preset 5
#PRST-STO 5CR ~PRST-STR 5 OKCRLF
Recall video connections from
preset 3
#PRCL 3CR ~PRST-RCL 3 OKCRLF
Show source of video output 2
from preset 3
#PRST-VID? 3,2CR ~PRST-VID 3: 4>2 CRLF
11.3.5 Operation Commands
Command Syntax Response
Lock front panel LOCK-FP LOCK-MODE
Short form: LCK LOCK-MODE
LOCK-FP LOCK-MODE RESULT
Get front panel locking state LOCK-FP?
LOCK-FP LOCK-MODE
Parameter Description:
LOCK-MODE = Front panel locking state:
‘0’ or ‘off’ to unlock front panel buttons
‘1’ or ‘on’ to lock front panel buttons
Reset device RESET RESET OK
Switch to protocol 2000* P2000 P2000 OK
* Protocol 2000 has a command to switch back to ASCII protocol (like Protocol 3000)
11.3.6 Machine Information Commands
Command Syntax Response
Read in/out count INFO-IO? INFO-IO: IN INPUTS_COUNT, OUT
OUTPUTS_COUNT
Read max preset count INFO-PRST? INFO-PRST: VID PRESET_VIDEO_COUNT
Reset to factory default
configuration
FACTORY FACTORY RESULT